Aquabord Wall Panels
The Aquabord tongue and groove panels have a face of 1000mm so 3 panels covers a 3m wall.
They are described as 1000mm wide panels but how many to you need for a 3m wall. Will three be enough or do you lose an amount on each join?Can they be 'bent'around corners without joining strips as suggested on your decoative panel range?Thanks
Written By AlanHi David. The Aquabord tongue and groove panels have a face of 1000mm so 3 panels covers a 3m wall - the tongue can be cut off on the final panel. We have found that bending works well on our narrow and lighter gauge panels but these 1000mm panels are much heavier gauge and bending is difficult and can lead to splitting - instead we recommend using one of our corner pieces.Hope this helps.