Is it possible to clad my curved bathroom ceiling with your uPVC ceiling panels?
I have a small bathroom ceiling which drops 6", then arches towards the window. I really wanted this cladding, but have no idea if I would be able to do it unless these panels are very pliable !
Just want to know if it's possible to clad my ceiling !
Written By AlanHi Helen, great question. Our ceiling panels are flexible along their length to a degree but if the radius of your curved ceiling is 6" then the panels won't bend that much. The solution to this depends on how you are running the panels; if you would like to run the panel ends into the bend then you can use a jointing strip where the curve begins and run panels (cut to length) at an angle from the joint to the wall end (you may need to cut some material from the back of the joint strip to allow the panels to follow the required angle). The other solution works if panels are running along the curve; in this case the back of the panels can be cut along several of the veins so allowing the panels to bend to the curve.Hope this helps - please call us if you need further clarification!